192.168.0.1

About 192.168.0.1

192.168.0.1 is set by the manufacturer at the factory as the router’s default IP address to access the administration console (such as D-Link, Netgear models), you can change it at any time using the network router's administrative console. 192.168.0.1 IP address is the first place you go if you experience any networking problems. All manufacturers use one default username and password for their routers, so 192.168.0.1 is recommended to change the password once you set up your network.

Any brand of router, or any computer on a local network for that matter, can be set to use 192.168.0.1 or a comparable private IPv4 address.

The popularity of 192.168.0.1 is also attributable to the manufacturers. IP address 192.168.0.1 is considered private as it falls within the range 192.168.0.0 up to 192.168.255.255 which are IP addresses issued to computers and devices on a single network.

All these IPs can’t be accessed from the Internet (Network Address Translation (NAT) is required for Internet communication). The private IPs can be used in a network, and it is good to know that only one device can have this IP 192.168.0.1. The address 192.168.0.1 is also referred to as a gateway address, with the gateway meaning network access point (the router).